Racing Beat Sway Bars RB 5410x

Ok, we're going to spill the secret to our suspension philosophy here. Go as light as practical on the springs and as heavy as possible on the sway bar. I know, that's contrarian logic, but it's proved a winner for us so far! And when you want a solid sway bar for your Miata, look no farther that Racing Beat!

Racing Beat Sway Bars are an engineering marvel, proven on the race track. Substantial engineering effort, select steel alloys, and precise manufacturing processes are combined to produce top performance components. All Racing Beat sway bars are finished with a distinctive, red powder coating, which provides a smooth, glossy protective layer.

These sway bars range from 1.3 to 2.3 times (that's 130-230%) stronger than stock, yet they only weigh 5.5 to 10 pounds (application dependant.) The Tubular bars are 1 1/8" OD by 1/8" Wall. The solid bars are 0.93" Diameter.

Don't forget to pick up your Racing Beat Heavy Duty Sway Bar Frame Mounts and Sway Bar Brace Kit when you order your sway bar.

Like all Racing Beat products, these are proudly made in the USA.More images here!

---

(select Miata application) 1990-1993 Solid Front, $115.00 1990-2000 Solid Rear, $100.00 1994-1997 Solid Front, $115.00 1999-2004 Tubular Front, $160.00 1990-1993 Tubular Front, $150.00 1994-1997 Tubular Front, $170.00

Racing Beat Sway Bars RB5410x...$100-$170

---

Racing Beat Heavty Duty Sway Bar Frame Mounts RB 54110

Trying to mount a high performance Racing Beat sway bar on a racing Miata with the stock sway bar frame mounts is like trying to put 10 pounds of potatoes into a 5 pound sack--somethings got to give! Eventually, it will be those stock sway bar frame mounts.

There's no rocket science here, just sound engineering principles. Powder-coated to improve corrosion resistance, these brackets are easily installed with only basic hand tools

Like all Racing Beat products, these are proudly made in the USA.

---

Racing Beat Heavty Duty Sway Bar Frame Mounts RB 54110...$40.00

---

Racing Beat Sway Bar Brace Kit RB 5412x

Do not upgrade your Miata's sway bar without doing something about those puny sheet-metal OE sway bar braces These Racing Beat Heavy Duty sway bar brace kits are perfect. You can lean hard on them through corner after corner with no fear that they might break--which will eventually happen to the stock units.

Manufactured from hollow-core steel tubing and utilizing laser-cut end flanges, this brace is finished with a rust-proof powder coat finish. Installation is accomplished by simply removing the sway bar mounting bolts and inserting the brace and support bar. Step-by-step instructions with fully detailed photos are included for easy installation.

Like all Racing Beat products, these are proudly made in the USA. More images here!

---

(select Miata application) 1990-2005 (Ex 90-95 w/power steering), $85.00 1990-1995 (w/power steering), $89.00

Racing Beat Sway Bar Brace Kit RB5412x...$85 and $89

---

Racing Beat Sway Bar Endlinks RB 5420x

Replacnig the sway bar icreases the anti-lift capacity of the vehicle. But if you try to use the stock end links you lose the instant reaction that are afforded by these Racing Beat Sway bar Endlinks. Stock end links flex and compress before finally producing the desired result. Not so with these.

Each set contains two (2) links to serve one (1) sway bar. These links have been designed for use on the Mazda stock bar, all Racing Beat sway bars, and comparable aftermarket bars. Note: The 54201 links feature a slightly shorter stud as compared to the 54200 links. The 54200 links CANNOT be used on the later 99-05 application.

Like all Racing Beat products, these are proudly made in the USA.

---

(select Miata application) 1990-1997 (Front) or 90-05 (Rear), $60.00 1999-2005 (Front), $60.00

Racing Beat Sway Bar Endlinks RB 5420x...$60.00

---