TMD KCA000 TMD Racing Custom Adjustable Upper Control Arms

Go back to: SUSPENSION Category
TMD KCA000 TMD Racing Custom Adjustable Front-Upper Control Arms, Picture #01

TMD Racing Custom Adjustable Upper Control Arms TMD KCA000

Racing mandates the ability to make fast, precise suspension adjustments at the race track. Unfortunately, when we looked for for adjustable upper control arms for our Miata, none were to be found. That's why we made our own. These gorgeous control arms combine beauty with rugged durability and precision adjustment.

Our TMD Racing front control arms are precision-engineered from quality steel and feature light weight and high-quality Heim Joints. They are brightly painted to look good under pressure. The rear control arms are contstructed from aluminum and are anodized so they look great too.

The front control arm uses (but does not include) the stock Miata ball joint. As you may be aware, this ball joint it not available for individual sale. It can be pressed out of the stock control arm and pressed into this control arm. We hope to offer a replacement ball joint in the very near future.

The rear control arms require a rather simple modification of the subframe for installation. Since a single bolt is used between the two stock pickup points, the pickup point must be drilled straight through to accept the bolt.

Check out this handy Rear-Upper Control Arm Installation Video!

More images and FAQ here!

TMD Racing Custom Adjustable Upper Control Arms
TMD KCA000...$147 - $445

Note! Products manufactured by TMD Racing for EPMiata.Com are strictly racing products, sold as-is, and have no warranty or guarantee of suitability for any purpose whatsoever. We have found them to work well in our SCCA E-Production 1995 Miata. Your experience may differ. Use in any application is entirely at the consumer's discretion and risk.

 

Q&A:

Which end does your miata rear upper control arm come with, the rod-end or the bulkier end that is shown in the install pictures? And: I assume you have had no issues only using the one pickup point off the subframe as opposed to the stock 2?

The picture of the EPMiata adjustable upper-rear control arm is the first one shown below, against the white background. It comes with exactly what you see in the picture above, plus hardware. The picture immediately below that shows this control arm as it is installed on the EPMiata.

As you see, it does use both pickup points, however, it requires the installer to make one modification with is to drill through the pickup points so that the heim joint can be installed between the two using a single bolt (included in the kit.) This is as opposed to the stock upper control arm which uses fits around theoutside of the pickup points and mounts with two separate bolts into the subframe.

Do these control arms fit mazda eunos?

To be honest, until I got your email I'd never heard of the Eunos brand. I did some research and it seems that Mazda sells the MX-5 as a Eunos Roadster. That would seem to imply that they reuse most of the same parts, which would further suggest that the control arms might fit. However, I can not say definitively. I would be glad to further research this but since the Eunos is not available here I really don't have a way to get further information. Maybe someone else can write in and enlighten us.

Images

TMD CCA0001 TMD Racing Custom Adjustable Rear-Upper Control Arms, Picture #01 TMD CCA0001 TMD Racing Custom Adjustable Rear-Upper Control Arms, Picture #02 TMD CCA0002 TMD Racing Custom Adjustable Rear-Front Control Arms, Picture #01 TMD KCA0002 TMD Racing Custom Adjustable Front-Upper Control Arms, Picture #02 TMD KCA0002 TMD Racing Custom Adjustable Front-Upper Control Arms, Picture #03 TMD KCA0002 TMD Racing Custom Adjustable Front-Upper Control Arms, Picture #04 TMD KCA0002 TMD Racing Custom Adjustable Front-Upper Control Arms, Picture #05
 

Don't see what you're looking for?
Contact Us!